China factory SS304 SS316 Germany Style Worm Gear 9mm & 12mm Width Stainless Steel Pipe Clamps near me supplier

Product Description

Detailed Photos

 
Worm gear hose clamps, also referred to as radiator clamps, jubilee clips, worm drive hose clamps, or screw hose clamps, are possibly the most widely used style of hose clamp. Worm gear hose clamps are designed with a captive worm gear screw attached to a steel band. 

In our factory, we have full range of hose clamp, and own a complete inductry chain including molds processing, products manufacturing, surface treatment, rubber vulcanizing and screw production.

Products systems including:
1, Germany stype Non-perforated type with & without welded hose pipe clamps, 
2, Italy style hose clamp, 
3, MICOR perforeated hose pipe clamps, 
4, American type perforated hose pipe clamps, 
5, Quick release hose pipe clamp, 
6, Constant Tension clamps, 
7, T-Bolt hose pipe clamps, 
8, Lihgt & heavy Unitary hose pipe clamps, 
9, Double bolts & double bands super hose pipe clamps
10, Single & Double ears hose pipe clamps
11, pipe strap
12, hose pipe clamps with rubber
13, PP & PEX snap clip

 

Material

Band

Housing

Screw

W1

Zinc plated steel

Zinc plated steel

Zinc plated steel

W2

AISI 430ss/201ss

AISI 430ss/201ss

Zinc plated steel

W3

AISI 301ss/304ss

AISI 301ss/304ss

AISI 301ss/304ss

W4

AISI 316ss

AISI 316ss

AISI 316ss

       

 

German style hose clamp 9 & 12mm
Size
(mm)
W1 W2 W4 W5 Packing
pcs/bag pcs/ctn
8-12 100 1000
10-16 100 1000
12-22 100 1000
16-27 100 1000
20-32 100 500
25-40 100 500
30-45 50 500
35-50 50 500
40-60 50 500
50-70 50 500
60-80 50 500
70-90 50 500
80-100 50 500
90-110 50 500
100-120 25 250
110-130 25 250
120-140 25 250
130-150 25 250
140-160 25 250

 

Welding Type Clamps M8 With Rubber
Model Number D(mm) R(mm) INCH Band thickness
and width
JM-HC001519 18 15-19 3/8″ 20*(1.2~1.5)
JM-HC57125 22 20-25 1/2″ 20*(1.2~1.5)
JM-HC002630 28 26-30 3/4″ 20*(1.2~1.5)
JM-HC003236 35 32-36 1″ 20*(1.2~1.5)
JM-HC003843 40 38-43 11/4″ 20*(1.2~1.5)
JM-HC05711 48 47-51 11/2″ 20*(1.2~1.5)
JM-HC05718 54 53-58   20*(1.2~1.5)
JM-HC006064 60 60-64 2″ 20*(1.2~1.5)
JM-HC006872 70 68-72   20*(1.2~1.5)
JM-HC05710 75 75-80 21/2″ 20*(1.2~1.5)
JM-HC008086 83 80-86   20*(1.2~1.5)
JM-HC0 0571 2 90 87-92 3″ 20*(1.2~1.5)
JM-HC057105 100 99-105 31/2″ 20*(1.2~1.5)
JM-HC5717112 110 107-112   20*(1.2~1.5)
JM-HC00113118 115 113-118 4″ 20*(1.2~1.5)
JM-HC00125130 125 125-130   20*(1.2~1.5)
JM-HC00132137 133 132-137   20*(1.2~1.5)
JM-HC00136142 140 136-142 5″ 20*(1.2~1.5)
JM-HC00159166 160 159-166 6″ 20*(1.2~1.5)
JM-HC5715712 200 200-212   20*(1.2~1.5)

“U”Typy Without Rubber
Model Number D(mm) A*B PCS/BOX BOX/CARTON
JM-HC09006 6 12*1.2 100 10
JM-HC09008 8 12*1.2 100 10
JM-HC09571 10 12*1.2 100 10
JM-HC 0571 2 12 12*1.2 100 10
JM-HC 0571 4 14 12*1.2 100 10
JM-HC 0571 5 15 12*1.2 100 10
JM-HC 0571 6 16 12*1.2 100 10
JM-HC 0571 8 18 15*1.2 100 10
JM-HC09571 20 15*1.2 100 10
JM-HC571 22 15*1.2 100 10
JM-HC09571 24 15*1.2 100 10
JM-HC 0571 6 26 15*1.2 100 10
JM-HC09571 28 15*1.2 100 10
JM-HC 0571 0 30 15*1.2 50 10
JM-HC571 32 18*1.2 50 10
JM-HC 0571 7 37 18*1.2 50 10
JM-HC09040 40 18*1.2 50 10
JM-HC09042 42 18*1.2 50 10
JM-HC09047 47 18*1.2 50 10
JM-HC 0571 0 60 18*1.2 50 10

Welding Type Clamps M8+10 With Rubber
Model Number D(mm) R(mm) INCH Band thickness
and width
JM-HC011519 18 15-19 3/8″ 20*(1.8~2.0)
JM-HC012571 22 20-25 1/2″ 20*(1.8~2.0)
JM-HC012630 28 26-30 3/4″ 20*(1.8~2.0)
JM-HC013236 35 32-36 1″ 20*(1.8~2.0)
JM-HC013843 40 38-43 11/4″ 20*(1.8~2.0)
JM-HC014751 48 47-51 11/2″ 20*(1.8~2.0)
JM-HC015358 54 53-58   20*(1.8~2.0)
JM-HC016064 60 60-64 2″ 20*(1.8~2.0)
JM-HC016872 70 68-72   20*(1.8~2.0)
JM-HC017580 75 75-80 21/2″ 20*(1.8~2.0)
JM-HC018086 83 80-86   20*(1.8~2.0)
JM-HC018792 90 87-92 3″ 20*(1.8~2.0)
JM-HC0199105 100 99-105 31/2″ 20*(1.8~2.0)
JM-HC0115712 110 107-112   20*(1.8~2.0)
JM-HC01113118 115 113-118 4″ 20*(1.8~2.0)
JM-HC01125130 125 125-130   20*(1.8~2.0)
JM-HC01132137 133 132-137   20*(1.8~2.0)
JM-HC01136142 140 136-142 5″ 20*(1.8~2.0)
JM-HC01159166 160 159-166 6″ 20*(1.8~2.0)
JM-HC01205712 200 200-212   20*(1.8~2.0)
JM-HC01248252 250 248-252   20*(1.8~2.0)
JM-HC01312318 315 312-318   20*(1.8~2.0)

Welding Type Clamps M8+10 Without Rubber
Model Number D(mm) R(mm) INCH Band thickness
and width
JM-HC57119 18 15-19 3/8″ 20*(1.8~2.0)
JM-HC032571 22 20-25 1/2″ 20*(1.8~2.0)
JM-HC032630 28 26-30 3/4″ 20*(1.8~2.0)
JM-HC033236 35 32-36 1″ 20*(1.8~2.0)
JM-HC033843 40 38-43 11/4″ 20*(1.8~2.0)
JM-HC034751 48 47-51 11/2″ 20*(1.8~2.0)
JM-HC57158 54 53-58   20*(1.8~2.0)
JM-HC036064 60 60-64 2″ 20*(1.8~2.0)
JM-HC036872 70 68-72   20*(1.8~2.0)
JM-HC57180 75 75-80 21/2″ 20*(1.8~2.0)
JM-HC038086 83 80-86   20*(1.8~2.0)
JM-HC038792 90 87-92 3″ 20*(1.8~2.0)
JM-HC0399105 100 99-105 31/2″ 20*(1.8~2.0)
JM-HC571712 110 107-112   20*(1.8~2.0)
JM-HC5713118 115 113-118 4″ 20*(1.8~2.0)
JM-HC5715130 125 125-130   20*(1.8~2.0)
JM-HC5712137 133 132-137   20*(1.8~2.0)
JM-HC5716142 140 136-142 5″ 20*(1.8~2.0)
JM-HC5719166 160 159-166 6″ 20*(1.8~2.0)
JM-HC03205712 200 200-212   20*(1.8~2.0)
JM-HC03248252 250 248-252   20*(1.8~2.0)
JM-HC03312318 315 312-318   20*(1.8~2.0)

 

Company Profile

Established in 2003, HangZhou Jay&Min Sanitaryware Tech Co., Ltd. is a young and fast growing factory. We are a professional manufacturer and exporter of bathroom&Kitchen sanitaryware products, specially in Faucet aerator, Kitchen aerator, Hand shower and all kinds of hose clamps.. We are very strong in R&D capability. More importantly, we have a dedicated team who are ready to provide efficient and professional services to our customers at any time. Our Managing Department is responsible for company operation and development plHangZhou. Constant efforts are taken by them to make our service system more efficient, thus serve our customers better. “Customer First” is the principle that all these sections adhere to. We look forward to building rewarding relationships with clients worldwide.

FAQ

1. who are we?
We are based in ZHangZhoug, China, start from 2571,sell to Western Europe(11.11%),Eastern Asia(11.11%),Mid East(11.11%),Oceania(11.11%),Africa(11.11%),Southeast Asia(11.11%),Eastern Europe(11.11%),South America(11.11%),North America(11.11%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Faucet Aerator,Water saving,LED aerator,Drain cleaner,hose clamp

4. why should you buy from us not from other suppliers?
We are a professional manufacturer of Kitchen & Bathroom sanitaryware, specially in Water saving faucet aerator, Kitchen swivel sprayer, LED kitchen sprayer, and all kinds of water saving parts in family water saving products.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,FCA;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A;

The Four Basic Components of a Screw Shaft

There are 4 basic components of a screw shaft: the Head, the Thread angle, and the Threaded shank. These components determine the length, shape, and quality of a screw. Understanding how these components work together can make purchasing screws easier. This article will cover these important factors and more. Once you know these, you can select the right type of screw for your project. If you need help choosing the correct type of screw, contact a qualified screw dealer.

Thread angle

The angle of a thread on a screw shaft is the difference between the 2 sides of the thread. Threads that are unified have a 60 degree angle. Screws have 2 parts: a major diameter, also known as the screw’s outside diameter, and a minor diameter, or the screw’s root diameter. A screw or nut has a major diameter and a minor diameter. Each has its own angle, but they all have 1 thing in common – the angle of thread is measured perpendicularly to the screw’s axis.
The pitch of a screw depends on the helix angle of the thread. In a single-start screw, the lead is equal to the pitch, and the thread angle of a multiple-start screw is based on the number of starts. Alternatively, you can use a square-threaded screw. Its square thread minimizes the contact surface between the nut and the screw, which improves efficiency and performance. A square thread requires fewer motors to transfer the same load, making it a good choice for heavy-duty applications.
A screw thread has 4 components. First, there is the pitch. This is the distance between the top and bottom surface of a nut. This is the distance the thread travels in a full revolution of the screw. Next, there is the pitch surface, which is the imaginary cylinder formed by the average of the crest and root height of each tooth. Next, there is the pitch angle, which is the angle between the pitch surface and the gear axis.
screwshaft

Head

There are 3 types of head for screws: flat, round, and hexagonal. They are used in industrial applications and have a flat outer face and a conical interior. Some varieties have a tamper-resistant pin in the head. These are usually used in the fabrication of bicycle parts. Some are lightweight, and can be easily carried from 1 place to another. This article will explain what each type of head is used for, and how to choose the right 1 for your screw.
The major diameter is the largest diameter of the thread. This is the distance between the crest and the root of the thread. The minor diameter is the smaller diameter and is the distance between the major and minor diameters. The minor diameter is half the major diameter. The major diameter is the upper surface of the thread. The minor diameter corresponds to the lower extreme of the thread. The thread angle is proportional to the distance between the major and minor diameters.
Lead screws are a more affordable option. They are easier to manufacture and less expensive than ball screws. They are also more efficient in vertical applications and low-speed operations. Some types of lead screws are also self-locking, and have a high coefficient of friction. Lead screws also have fewer parts. These types of screw shafts are available in various sizes and shapes. If you’re wondering which type of head of screw shaft to buy, this article is for you.

Threaded shank

Wood screws are made up of 2 parts: the head and the shank. The shank is not threaded all the way up. It is only partially threaded and contains the drive. This makes them less likely to overheat. Heads on wood screws include Oval, Round, Hex, Modified Truss, and Flat. Some of these are considered the “top” of the screw.
Screws come in many sizes and thread pitches. An M8 screw has a 1.25-mm thread pitch. The pitch indicates the distance between 2 identical threads. A pitch of 1 is greater than the other. The other is smaller and coarse. In most cases, the pitch of a screw is indicated by the letter M followed by the diameter in millimetres. Unless otherwise stated, the pitch of a screw is greater than its diameter.
Generally, the shank diameter is smaller than the head diameter. A nut with a drilled shank is commonly used. Moreover, a cotter pin nut is similar to a castle nut. Internal threads are usually created using a special tap for very hard metals. This tap must be followed by a regular tap. Slotted machine screws are usually sold packaged with nuts. Lastly, studs are often used in automotive and machine applications.
In general, screws with a metric thread are more difficult to install and remove. Fortunately, there are many different types of screw threads, which make replacing screws a breeze. In addition to these different sizes, many of these screws have safety wire holes to keep them from falling. These are just some of the differences between threaded screw and non-threaded. There are many different types of screw threads, and choosing the right 1 will depend on your needs and your budget.
screwshaft

Point

There are 3 types of screw heads with points: cone, oval, and half-dog. Each point is designed for a particular application, which determines its shape and tip. For screw applications, cone, oval, and half-dog points are common. Full dog points are not common, and they are available in a limited number of sizes and lengths. According to ASTM standards, point penetration contributes as much as 15% of the total holding power of the screw, but a cone-shaped point may be more preferred in some circumstances.
There are several types of set screws, each with its own advantage. Flat-head screws reduce indentation and frequent adjustment. Dog-point screws help maintain a secure grip by securing the collar to the screw shaft. Cup-point set screws, on the other hand, provide a slip-resistant connection. The diameter of a cup-point screw is usually half of its shaft diameter. If the screw is too small, it may slack and cause the screw collar to slip.
The UNF series has a larger area for tensile stress than coarse threads and is less prone to stripping. It’s used for external threads, limited engagement, and thinner walls. When using a UNF, always use a standard tap before a specialized tap. For example, a screw with a UNF point is the same size as a type C screw but with a shorter length.

Spacer

A spacer is an insulating material that sits between 2 parts and centers the shaft of a screw or other fastener. Spacers come in different sizes and shapes. Some of them are made of Teflon, which is thin and has a low coefficient of friction. Other materials used for spacers include steel, which is durable and works well in many applications. Plastic spacers are available in various thicknesses, ranging from 4.6 to 8 mm. They’re suitable for mounting gears and other items that require less contact surface.
These devices are used for precision fastening applications and are essential fastener accessories. They create clearance gaps between the 2 joined surfaces or components and enable the screw or bolt to be torqued correctly. Here’s a quick guide to help you choose the right spacer for the job. There are many different spacers available, and you should never be without one. All you need is a little research and common sense. And once you’re satisfied with your purchase, you can make a more informed decision.
A spacer is a component that allows the components to be spaced appropriately along a screw shaft. This tool is used to keep space between 2 objects, such as the spinning wheel and an adjacent metal structure. It also helps ensure that a competition game piece doesn’t rub against an adjacent metal structure. In addition to its common use, spacers can be used in many different situations. The next time you need a spacer, remember to check that the hole in your screw is threaded.
screwshaft

Nut

A nut is a simple device used to secure a screw shaft. The nut is fixed on each end of the screw shaft and rotates along its length. The nut is rotated by a motor, usually a stepper motor, which uses beam coupling to accommodate misalignments in the high-speed movement of the screw. Nuts are used to secure screw shafts to machined parts, and also to mount bearings on adapter sleeves and withdrawal sleeves.
There are several types of nut for screw shafts. Some have radial anti-backlash properties, which prevent unwanted radial clearances. In addition, they are designed to compensate for thread wear. Several nut styles are available, including anti-backlash radial nuts, which have a spring that pushes down on the nut’s flexible fingers. Axial anti-backlash nuts also provide thread-locking properties.
To install a ball nut, you must first align the tangs of the ball and nut. Then, you must place the adjusting nut on the shaft and tighten it against the spacer and spring washer. Then, you need to lubricate the threads, the ball grooves, and the spring washers. Once you’ve installed the nut, you can now install the ball screw assembly.
A nut for screw shaft can be made with either a ball or a socket. These types differ from hex nuts in that they don’t need end support bearings, and are rigidly mounted at the ends. These screws can also have internal cooling mechanisms to improve rigidity. In this way, they are easier to tension than rotating screws. You can also buy hollow stationary screws for rotator nut assemblies. This type is great for applications requiring high heat and wide temperature changes, but you should be sure to follow the manufacturer’s instructions.

China factory SS304 SS316 Germany Style Worm Gear 9mm & 12mm Width Stainless Steel Pipe Clamps   near me supplier China factory SS304 SS316 Germany Style Worm Gear 9mm & 12mm Width Stainless Steel Pipe Clamps   near me supplier

Recent Posts